Front Propeller Shaft Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT PROPELLER SHAFT
1. for Front Differential Side:
  1. Align the matchmarks on the differential and propeller shaft flange.
  2. Install the propeller shaft with the 4 nuts and 4 washers.
    Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
    
    Fig 1: Identifying Matchmarks On Differential And Propeller Shaft Flange
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Transfer Side:
  1. Align the matchmarks on the transfer and propeller shaft flange.
  2. Connect the propeller shaft with the 4 nuts and 4 washers.
    Torque: 80 N*m (816 kgf*cm, 59 ft.*lbf)
    
    Fig 2: Identifying Matchmarks On Transfer And Propeller Shaft Flanges
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
1. Install the heat insulator bracket to the crossmember with the 2 bolts.
  Torque: 16 N*m (163 kgf*cm, 12 ft.*lbf)
INSTALL PROPELLER SHAFT HEAT INSULATOR
1. Install the heat insulator to the heat insulator bracket with the 2 bolts.
  Torque: 16 N*m (163 kgf*cm, 12 ft.*lbf)
  
  Fig 3: Locating Heat Insulator Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002