Front Propeller Shaft Assembly: Inspection

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT PROPELLER SHAFT ASSEMBLY
1. Check that the propeller shaft is not damaged or deformed.
  If necessary, replace the propeller shaft.
2. Using a dial indicator, check the propeller shaft runout.
  Maximum runout: 0.61 mm (0.0240 in.)
  
  Fig 1: Checking Propeller Shaft Runout Using Dial Indicator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT UNIVERSAL JOINT SPIDER BEARING
1. Check that the joints move smoothly.
2. Check the spider bearings for wear and damage.
3. Check the spider bearing axial play by turning the yoke while holding the shaft tightly.
  Maximum bearing axial play: 0.05 mm (0.00197 in.)
  
  If necessary, replace the spider bearing.