Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Spark plug x Cylinder head | 20 | 204 | 15 | |
| Ignition coil x Cylinder head | 9.0 | 92 | 80 in.*lbf | |
| V-bank cover x Engine | 7.5 | 76 | 66 in.*lbf | |
| No. 1 engine under cover x Body | For bolt | 29 | 296 | 21 |
| For nut | 5.4 | 55 | 48 in.*lbf | |
| Camshaft bearing cap x Cylinder head (cylinder head LH and RH) | For 10 mm head | 9.0 | 92 | 80 in.*lbf |
| For 12 mm head | 24 | 245 | 18 | |
| No. 2 and No. 3 chain tensioner x Cylinder head | 21 | 214 | 15 | |
| Camshaft timing gear x Camshaft | 100 | 1020 | 74 | |
| No. 1 chain tensioner x Cylinder head | 10 | 102 | 7 | |
| Timing chain cover plate x Timing chain cover | 9.0 | 92 | 80 in.*lbf | |
| Union x Cylinder head | 15 | 150 | 11 | |
| Head strait screw plug x Cylinder head | 80 | 816 | 59 | |
| Stud bolt x Cylinder head | For stud bolt A and C | 4.0 | 41 | 35 in.*lbf |
| For stud bolt B | 20 | 204 | 15 | |
| Stud bolt x Cylinder block | For stud bolt A | 11 | 112 | 8 |
| For stud bolt B | 4.5 | 46 | 40 in.*lbf | |
| For stud bolt BC | 4.0 | 41 | 35 in.*lbf | |
| No. 1 oil nozzle x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft bearing cap x Cylinder block Quantity: 16 | 1st | 61 | 622 | 45 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Crankshaft bearing cap x Cylinder block Quantity: 8 | 26 | 262 | 19 | |
| Connecting rod cap x Connecting rod | 1st | 25 | 255 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Engine hanger x Cylinder head | 33 | 336 | 24 | |
| Drive plate and ring gear x Crankshaft | 83 | 46 | 61 | |
| Engine mounting insulator x Front No. 1 engine mounting bracket and Body | For bolt | 79 | 806 | 58 |
| For Nut | 72 | 734 | 53 | |
| Cooler compressor x V-ribbed belt tensioner | 25 | 250 | 18 | |
| Battery positive cable x Battery positive terminal | 12 | 125 | 9 | |
| Ground cable x Body (RH side) | 8.0 | 82 | 71 in.*lbf | |
| Ground cable x Body (LH side) | 8.4 | 86 | 74 in.*lbf | |
| Wire harness bracket x Body | 10 | 102 | 7 | |
| Wire harness bracket x Cylinder head RH | 8.0 | 82 | 71 in.*lbf | |
| Engine rear oil seal retainer x Cylinder block | For nut | 9.0 | 92 | 80 in.*lbf |
| For bolt | 10 | 102 | 7 | |
| Knock sensor x Cylinder block | 20 | 204 | 15 | |
| No. 1 water outlet pipe x Cylinder block | 10 | 102 | 7 | |
| Cylinder head RH x Cylinder block | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| Cylinder head LH x Cylinder block Quantity: 8 | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| Cylinder head LH x Cylinder block Quantity: 2 | 30 | 367 | 27 | |
| No. 1 chain vibration damper x Cylinder head, Cylinder block | 19 | 194 | 14 | |
| No. 1 idler gear shaft x Cylinder block | 60 | 612 | 44 | |
| Water pump x Timing chain cover | 9.0 | 92 | 80 in.*lbf | |
| Timing chain cover x Cylinder head, Cylinder block | 23 | 235 | 17 | |
| Oil pan x Cylinder block | For bolt A, B and nut | 21 | 214 | 15 |
| For bolt C | 10 | 102 | 7 | |
| Oil strainer x Oil pan | 9.0 | 92 | 80 in.*lbf | |
| Oil pan drain plug x No. 2 oil pan | 40 | 408 | 30 | |
| Crankshaft pulley x Crankshaft | 250 | 2549 | 184 | |
| Cylinder head cover LH and RH x Cylinder head | For bolt A | 10 | 102 | 7 |
| For bolt B and nut | 9.0 | 92 | 80 in.*lbf | |
| Ventilation valve x Cylinder head cover | 27 | 275 | 20 | |
| Oil filler cap housing x Cylinder head cover LH | 9.0 | 92 | 80 in.*lbf | |
| Oil control valve filter x Cylinder head LH and RH | 62 | 632 | 46 | |
| Crankshaft position sensor x Cylinder block | 10 | 102 | 7 | |
| VVT sensor x Cylinder head | 8.0 | 82 | 71 in.*lbf | |
| Camshaft timing control valve x Cylinder head LH and RH | 10 | 102 | 7 | |
| Cylinder block water drain cock x Cylinder block | 25 | 255 | 18 | |
| Rear water by-pass joint x Cylinder head LH and RH | 9.0 | 92 | 80 in.*lbf | |
| Oil filter bracket x Cylinder head LH | 19 | 194 | 14 | |
| Oil cooler x Oil filter bracket | 68 | 693 | 50 | |
| No. 1 idler pulley x Timing chain cover | 54 | 551 | 40 | |
| No. 2 idler pulley x Timing chain cover | 39 | 398 | 29 | |
| Front No. 1 engine mounting bracket LH and RH x Cylinder block | 43 | 438 | 32 | |
| Engine oil level dipstick guide x Cylinder head RH | 9.0 | 92 | 80 in.*lbf | |
| V-ribbed belt tensioner x Cylinder block | 36 | 367 | 27 | |
| Heater water pipe x Cylinder head RH | 9.8 | 100 | 87 | |
| Engine coolant temperature sensor x Rear water by-pass joint | 20 | 204 | 15 | |
| Oil pressure switch x Oil filter bracket | 15 | 150 | 11 | |
| Rear No. 1 engine mounting insulator x Automatic transmission | 40 | 408 | 30 | |
| No. 3 frame crossmember x Automatic transmission | 16 | 63 | 30 | |
| No. 3 frame crossmember x Body | 110 | 1122 | 81 | |