Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Set key interlock cable (2) to key cylinder (1) and install holder (A).

Fig 1: Identifying Holder And Key Cylinder
Courtesy of NISSAN MOTOR CO., U.S.A.
Clamp key interlock cable (2) and fix to key interlock cable (2) with clips (B).
Turn ignition key to "LOCK" position.
Set selector lever to "P" position.
Insert interlock rod into adjuster holder.

Fig 2: Identifying Interlock Rod Into Adjuster Holder

Courtesy of NISSAN MOTOR CO., U.S.A.

Install casing cap to bracket.
Move slider in order to fix adjuster holder to interlock rod.

CAUTION: Do not touch adjacent parts of key interlock cable when slider is being held.

Insert slider into key interlock rod straightly.