LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Transfer Case) >> Transfer Fluid >> Replacement >> Draining

Transfer Fluid: Replacement: Draining

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Run the vehicle to warm up the transfer unit sufficiently.
  2. Stop the engine, and remove the drain plug to drain the transfer fluid.
    3. Fig 1: Identifying Drain Plug
    G05225307Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Apply sealant to drain plug. Install drain plug on transfer and tighten to the specified torque. Refer to "COMPONENTS ".
scientia non olet · About LEMON Manuals