On-Vehicle Inspection
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT ACCESSORY METER ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard resistance
ACCESSORY METER ASSEMBLY RESISTANCE REFERENCETester Connection Condition Specified Condition 12 (E)-Body ground Always Below 1 Ω - Measure the voltage according to the value(s) in the table below.
Standard voltage
ACCESSORY METER ASSEMBLY VOLTAGE SPECIFICATIONSTester Connection Condition Specified Condition 22 (ACC) - Body ground Ignition switch OFF Below 1 V Ignition switch ACC 10 to 14 V 24 (+B) - Body ground Always 10 to 14 V
- Measure the resistance according to the value(s) in the table below.