LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Suspension System) >> Front Stabilizer Bar >> Removal

Front Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL 
  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH 
      Fig 1: Identifying Stabilizer Link
      G05159615Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the bolt, nut and stabilizer link.

      HINT:

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side.

  4. REMOVE FRONT STABILIZER BRACKET 
      Fig 2: Identifying Front Stabilizer Bracket
      G05159616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 4 bolts and 2 brackets.
  5. REMOVE FRONT STABILIZER BAR 
    1. Remove the front stabilizer bar from the vehicle.
    2. Remove the 2 brackets and cushions from the stabilizer bar.
  6. REMOVE FRONT NO. 1 STABILIZER BAR BUSH 
    1. Remove the 2 bushes from the front stabilizer bar.
scientia non olet · About LEMON Manuals