LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting System) >> Fog Light Relay >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FOG LIGHT RELAY (FOG) 
    1. Remove the fog light relay from the engine room relay box.
      Fig 1: Locating Fog Light Relay (FOG)
      G05160971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT FOG LIGHT RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 2: Identifying Fog Light Relay Terminals
      G05160972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      FOG LIGHT RELAY

      Tester Connection Condition Specified Condition
      3 - 5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      When battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.

  3. INSTALL FOG LIGHT RELAY 
scientia non olet · About LEMON Manuals