LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Supplemental Restraint System) >> Seat Position Sensor >> Removal

Seat Position Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT SEAT ASSEMBLY LH 
    1. Remove the front seat (see REMOVAL ).
  2. REMOVE SEAT POSITION SENSOR 
    1. Using a T30 "TORX" socket wrench, remove the screw and seat position sensor with sensor protector.
    2. Disconnect the connector.
    3. Remove the seat slide position sensor protector from the seat position sensor.
      Fig 1: Identifying Screw & Seat Position Sensor
      G05156070Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals