LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (VQ35DE) - Component And System Testing >> Fuel Pump >> Component Inspection >> Fuel Pump

Fuel Pump

  1. Turn ignition switch OFF.
  2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
  3. Check resistance between "fuel level sensor unit and fuel pump" terminals 1 and 3.

    Resistance: 0.2 - 5.0Ω [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Fuel Level Sensor Unit And Fuel Pump Terminals 1 And 3
    G04875487Courtesy of NISSAN MOTOR CO., U.S.A.