Meter Buzzer Circuit Inspection

Check battery power supply of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".

OK or NG 

OK: GO TO 2.

NG: Repair battery power supply circuit of combination meter.

1. Select "METER A/C AMP" on CONSULT-III.
2. With "DATA MONITOR", confirm "BUZZER" under the condition of buzzer input. (Seat belt warning chime, turn signal lamp operate, etc.)

   "BUZZER" Under the condition of buzzer input : ON 

   Except above : OFF 

OK or NG 

OK: GO TO  3.

NG: Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".

Replace combination meter.

Does meter buzzer beep? 

Yes: INSPECTION END

No: Replace unified meter and A/C map.