Terminals and Reference Value for Unified Meter and A/C Amp
TERMINALS AND REFERENCE VALUE FOR UNIFIED METER AND A/C AMP
| Terminal No. | Wire color | Item | Condition | Reference value (Approx.) | |
|---|---|---|---|---|---|
| Ignition switch | Operation or condition | ||||
| 7 | R | TX communication line (To combination meter) | ON | - | |
| 27 | G | RX communication line (From combination meter) | ON | - | |
| 28 | LG | Vehicle speed signal output (8-pulse) | ON | Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)] |
NOTE:
Maximum voltage may be 5 V due to specifications (connected units).
|
| 41 | V | Ignition switch ACC or ON | ACC | - | Battery voltage |
| 42 | P/L | Fuel level sensor signal | - | - | |
| 53 | W/G | Ignition switch ON or START | ON | - | Battery voltage |
| 54 | W/G | Battery power supply | OFF | - | Battery voltage |
| 55 | B | Ground | ON | - | 0 V |
| 56 | L | CAN-H | - | - | - |
| 58 | B | Fuel level sensor ground | ON | - | 0 V |
| 71 | B | Ground (power) | ON | - | 0 V |
| 72 | P | CAN-L | - | - | - |