| CONSULT display |
DTC detection condition |
| B2112: SEAT SLIDE |
When any manual and automatic operations are not performed, if any motor operations of seat slide is detected for 0.1 second or more, status is judged "Output error". |
| B2113: SEAT RECLINING |
When any manual and automatic operations are not performed, if any motor operations of seat reclining is detected for 0.1 second or more, status is judged "Output error". |
| B2118: STRG TILT SENSOR |
When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from tilt sensor for 0.5 seconds or more. |
| B2119: STEERING TELESCO |
When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from telescopic sensor for 0.5 seconds or more. |
| B2126: DETENT SW |
With the A/T selector lever in P position (Detente switch OFF), if the vehicle speed of 7 km/h (4 MPH) or higher was input the detention switch input system is judged malfunctioning |
| B2128: UART COMM |
Malfunction is detected in UART communication. |