LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (VQ35DE) - DTCS P1220 To P2A03 >> DTC P2135: TP Sensor >> DTC Confirmation Procedure >> Testing Condition

Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

  1. Start engine and let it idle for 1 second.
  2. Check DTC.
  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals