Wheel Alignment
WHEEL ALIGNMENT SPECIFICATION
| Applied model | Except for sport models | For sport models | ||
|---|---|---|---|---|
| Camber Degree minute (Decimal degree) |
Minimum | -1° 50' (-1.83°) | ||
| Nominal | -1° 20' (-1.33°) | |||
| Maximum | -0° 50' (-0.83°) | |||
| Total toe-in | Distance | Minimum | 0 mm (0 in) | 0 mm (0 in) |
| Nominal | In 2.9 mm (0.110 in) | In 2.8 mm (0.110 in) | ||
| Maximum | In 5.8 mm (0.220 in) | In 5.6 mm (0.220 in) | ||
| Angle (left wheel or right wheel) Degree minute (Decimal degree) | Minimum | 0° 00' (0.00°) | ||
| Nominal | In 0° 07' (0.12°) | |||
| Maximum | In 0° 14' (0.23°) | |||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.