LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System (With 4WAS) >> On-Vehicle Repair >> 4WAS Main Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Turn the ignition switch OFF.
  2. Remove the rear wheel house finisher. Refer to "EXPLODED VIEW ".
  3. Disconnect 4WAS main control unit connectors, 4WAS rear motor relay connector and noise suppressor connectors.
  4. Remove the 4WAS main control unit bolt and nuts.
  5. Remove the 4WAS main control unit (1).
Fig 1: Locating 4WAS Main Control Unit Bolt And Nuts
G05735283Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals