Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "MEMORY SW 1", "MEMORY SW 2", "SET SW" in "Data monitor" mode with CONSULT-III.
Check seat memory switch signal under the following conditions.

CONDITION CHART

Monitor item	Condition		Status
MEMORY SW1	Memory switch 1	Push	ON
MEMORY SW1	Memory switch 1	Release	OFF
MEMORY SW2	Memory switch 2	Push	ON
MEMORY SW2	Memory switch 2	Release	OFF
SET SW	Set switch	Push	ON
SET SW	Set switch	Release	OFF

Is the indication normal?

Yes: INSPECTION END

No: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".