Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "DATA MONITOR" mode with CONSULT-III.
Check lifting switch (front) signal under the following conditions.

CONDITION CHART

Monitor item	Condition		Status
LIFT FR SW-UP	Lifting switch front (up)	Operate	ON
LIFT FR SW-UP	Lifting switch front (up)	Release	OFF
LIFT FR SW-DN	Lifting switch front (down)	Operate	ON
LIFT FR SW-DN	Lifting switch front (down)	Release	OFF

Is the indication normal?

Yes: INSPECTION END

No: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".