Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "LIFT FR PULSE" in "Data monitor" mode with CONSULT-III.
Check the lifting sensor (front) signal under the following conditions.

LIFTING SENSOR CONDITION CHART

Monitor item	Condition		Value
LIFT FR PULSE	Seat lifting (front)	Operate (up)	Change (increase)
		Operate (down)	Change (decrease)
		Release	No change

Is the indication normal?

Yes: INSPECTION END

No: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".