LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Window System >> On-Vehicle Repair >> Front Door Glass >> Inspection and Adjustment >> System Initialization >> Initialization

System Initialization: Initialization

Follow the steps below after installing each component to the vehicle.

  1. Disconnect the minus terminal of battery or disconnect power window switch harness connector temporarily. Then reconnect after at least 1 minute.
  2. Close the door.
  3. Turn ignition switch ON.
  4. Operate power window switch to make over a half of the window open area.
  5. Press the power window switch in the up direction (auto close position) and hold. Continue holding the switch even when window is completely closed and then release after 3 seconds.
  6. Inspect the anti-pinch system function.
NOTE: Initialization may be cancelled with continuous opening and closing operation. In this case, initialize the system.
scientia non olet · About LEMON Manuals