LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Power Window Control System) >> On-Vehicle Repair >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window main switch finisher (2) from the door finisher LH. Refer to "REMOVAL AND INSTALLATION ".
  2. Using a screwdriver (A), remove the power window main switch (1) screws, then release from the finisher (2).
    Fig 1: Removing Power Window Main Switch Screws
    G05382409Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals