LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Drive Positioner) >> Component Diagnosis >> Lifting Switch (Rear) >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "LIFT RR SW-UP", "LIFT RR SW-DN" in "Data monitor" mode with CONSULT-III.
    2. Check lifting switch (rear) signal under the following conditions.
      MONITOR ITEM STATUS CHART

      Monitor item Condition Status
      LIFT RR SW-UP Lifting switch rear (up) Operate ON
      Release OFF
      LIFT RR SW-DN Lifting switch rear (down) Operate ON
      Release OFF

    Is the indication normal? 

    YES: INSPECTION END

    NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals