LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Ventilation System) >> On-Vehicle Repair >> Intake Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the intake sensor electrical connector.
    NOTE: The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
  3. Twist the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.
    Fig 1: Identifying Intake Sensor And Cooling Unit Assembly
    G04903481Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals