Operation Condition

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Once the following condition from below is established, alert or warning will be executed.

OPERATION CONDITION CHART

Warning/Information functions		Operation procedure
Intelligent Key system malfunction		When a malfunction is detected on BCM, warning message will display.
OFF position warning	For internal	Ignition switch: ACC position. Door switch (driver side): ON (Door is open).
OFF position warning	For external	OFF position warning (For internal) is in active mode, driver side door has been closed. NOTE: OFF position (For external) active only when each of the sequence has occurred as below: P position warning → ACC warning → OFF position warning (For internal) → OFF position warning (For internal)
P position warning		Shift position: Except P position Engine is running to stopped (Ignition switch is ON to OFF)
Take away warning	Door is open to close	Ignition switch: Except LOCK position. Door switch: ON to OFF (Door is open to close). Intelligent Key can not be detected inside the vehicle.
	Door is open	Door switch: ON (Door is open) Key ID verification every 5 seconds when registered Intelligent Key can not be detected inside the vehicle.
	Take away through window	Engine is running. Key ID verification every 30 seconds when registered Intelligent Key can not be detected inside the vehicle. After vehicle speed verification, the registered Intelligent Key can not be detect inside the vehicle.
Door lock operation warning	Request switch operation	When request switch is pushed (lock operation) under the following conditions. Door switch: ON (Any door is open). Intelligent Key is inside vehicle.
Door lock operation warning	Intelligent Key button operation	When Intelligent Key button is pushed (lock operation) under the following conditions. Door switch: ON (Any door is open). Intelligent key is inside vehicle.
Key warning		Ignition switch is OFF position. Driver side door switch: ON (Driver side door is open). Keyfob is pressed inside the vehicle.
Intelligent Key insert information		Door switch: ON to OFF (Door is open to close). Ignition switch: OFF to ON position. Intelligent Key can not be detected inside the vehicle.
Engine start information	Ignition switch is ON position	Ignition switch: ON position. Shift position: P position Engine is stopped
Engine start information	Ignition switch is except ON position	Ignition switch: Except ON position. Shift position: P position Intelligent Key can be detected inside the vehicle.
Steering lock information		When steering lock can not be released after ignition switch is turned ON.
Intelligent Key low battery warning		When Intelligent Key has low battery, it is detected by BCM after ignition switch is turned ON.
Key ID warning		When registered intelligent Key cannot be detected inside the vehicle after ignition switch is turned ON.