Check Starting The Engine

1. Park vehicle on level surface.
2. Shift the selector lever to "P" or "N" position.
3. Turn ignition switch OFF.
4. Start the engine.

Does the engine start? 

YES: GO TO 2.

NO: Stop the road test and go to , "SYMPTOM TABLE ".

1. Turn ignition switch ON. (Do not start engine.)
2. Shift the selector lever to "D", "M" or "R" position.
3. Start the engine.

Does the engine start in any positions? 

YES: Stop the road test and go to , "SYMPTOM TABLE ".

NO: GO TO 3.

1. Shift the selector lever to "P" position.
2. Turn ignition switch OFF.
3. Release the parking brake.
4. Push the vehicle forward or backward.
5. Engage the parking brake.

When you push the vehicle with disengaging the parking brake, does it move? 

YES: Record the malfunction, then continue the rode test.

NO: GO TO 4.

1. Start the engine.
2. Shift the selector lever to "N" position.
3. Release the parking brake.

Does vehicle move forward or backward? 

YES: Record the malfunction, then continue the rode test.

NO: GO TO 5.

1. Engage the brake.
2. Shift the selector lever to "D" position.

When the A/T is shifted from "N" to "D", is there an excessive shock? 

YES: Record the malfunction, then continue the rode test.

NO: GO TO 6.

1. Shift the selector lever to "R" position.
2. Release the brake for 4 to 5 seconds.

Does the vehicle creep backward? 

YES: GO TO 7.

NO: Record the malfunction, then continue the rode test.

Inspect whether the vehicle creep forward when the A/T is put into the "D" position.

Does the vehicle creep forward in the "D" position? 

YES: Go to , "CRUISE TEST - PART 1 ".

NO: Record the malfunction and go to , "CRUISE TEST - PART 1 ".