Physical Values
TERMINALS DESCRIPTION AND PHYSICAL VALUES
| Terminal | Wire color | Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 1 | Ground | BR | Power supply (Memory back-up) | Input | Always | Battery voltage | |
| 2 | Ground | BR | Power supply (Memory back-up) | Input | Always | Battery voltage | |
| 3 | - | L | CAN-H | Input/Output | - | - | |
| 4 | - | V | K-line (CONSULT-III signal) | Input/Output | - | - | |
| 5 | Ground | B | Ground | Output | Always | 0 V | |
| 6 | Ground | Y | Power supply | Input | Ignition switch ON | Battery voltage | |
| Ignition switch OFF | 0 V | ||||||
| 7 | Ground | R | Back-up lamp relay | Input | Ignition switch ON | Selector lever in "R" position. | 0 V |
| Selector lever in other positions. | Battery voltage | ||||||
| 8 | - | P | CAN-L | Input/Output | - | - | |
| 9 | Ground | GR | Starter relay | Output | Ignition switch ON | Selector lever in "N" and "P" positions. | Battery voltage |
| Selector lever in other positions. | 0 V | ||||||
| 10 | Ground | B | Ground | Output | Always | 0 V | |