Wheel Alignment Inspection: Adjustment

Camber

If outside the standard value, adjust with adjusting bolt (1) in front lower link (2).

Standard

Camber: Refer to , "WHEEL ALIGNMENT ".

CAUTION: After adjusting camber, be sure to check toe-in.

Fig 1: Identifying Rear Lower Link With Adjusting Bolt

G05224352

Courtesy of NISSAN MOTOR CO., U.S.A.

Toe-In

If toe-in is not within the specification, adjust with adjusting bolt (1) in rear lower link (2).
Standard

Toe-In: Refer to , "WHEEL ALIGNMENT ".

CAUTION: Be sure to adjust equally on RH and LH side with adjusting bolt.
- If toe-in is not still within the specification, inspect and replace any damaged or worn suspension parts.
  
  Fig 2: Identifying Front Lower Link With Adjusting Bolt
  Courtesy of NISSAN MOTOR CO., U.S.A.