LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System >> With 4WAS >> On-Vehicle Repair >> 4WAS Main Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Turn the ignition switch OFF.
  2. Remove the trunk side finisher. Refer to "EXPLODED VIEW ".
  3. Disconnect 4WAS main control unit connectors, 4WAS rear motor relay connector and noise suppressor connectors.
  4. Remove the 4WAS main control unit bolts.
  5. Remove the 4WAS main control unit (1).
    Fig 1: Locating 4WAS Main Control Unit Bolts
    G05208105Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals