LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System >> With 4WAS >> On-Vehicle Repair >> 4WAS Front Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Turn the ignition switch OFF.
  2. Remove the instrument driver lower panel. Refer to "EXPLODED VIEW ".
  3. Disconnect 4WAS front control unit connectors.
    CAUTION: Disconnect 4WAS front control unit connectors 10 minutes after turning the ignition switch OFF.
  4. Remove the bolts of 4WAS front control unit.
  5. Remove the 4WAS front control unit (1).
    Fig 1: Locating 4WAS Front Control Unit Bolts
    G05208103Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals