Diagnostic Procedure
- CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace harness connectors.
- CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES: GO TO 3.
NO: Replace wiring harness. Repair or replace wiring harness.
- CHECK FRONT SIDE AIR BAG MODULE
- Replace front RH side air bag module.
- Check the displayed on CONSULT-III.
Is the inspection result normal?
YES: INSPECTION END .
NO: Check the intermittent incident. Refer to INTERMITTENT INCIDENT .