LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Control System - Component Testing) >> On-Vehicle Repair >> Intake Valve Timing Control >> Intake Valve Timing Control Solenoid Valve (RH) >> Removal

Intake Valve Timing Control Solenoid Valve (RH): Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove drive belt. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect Intake valve timing control solenoid valve connector (RH).
  3. Remove Intake valve timing control solenoid valve (RH) (3) from Intake valve timing control solenoid valve cover (RH) (1).
    Fig 1: Identifying Intake Valve Timing Control Solenoid Valve (RH) Remove/Install Components
    G05378611Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals