ICC Brake Hold Relay

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Apply 12V direct current between ICC brake hold relay terminals 1 and 2.

Check continuity between relay terminals 3 and 4, 6 and 7 under the following conditions.

CONTINUITY REFERENCE CHART

Condition	Between terminals	Continuity
12V direct current supply between terminals 1 and 2	3 and 4	Should not exist
12V direct current supply between terminals 1 and 2	6 and 7	Should exist
No current supply	3 and 4	Should exist
No current supply	6 and 7	Should not exist

If NG, replace ICC brake hold relay.

Fig 1: Identifying ICC Brake Hold Relay Connector Pinouts
Courtesy of NISSAN MOTOR CO., U.S.A.