LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Drive Positioner) >> Component Diagnosis >> Tilt Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "TILT SEN" in "Data monitor" mode with CONSULT-III.
    2. Check the tilt sensor signal under the following condition.
      MONITOR ITEM VALUE CHART

      Monitor item Condition Value
      TILT SEN Tilt position Change between
      1.2 V (Close to top)
      3.4 V (Close to bottom)

    Is the indication normal? 

    YES: INSPECTION END

    NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals