Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "PEDAL SEN" in "Data monitor" mode with CONSULT-III.

Check the pedal sensor signal under the following condition.

MONITOR ITEM VALUE CHART

Monitor item	Condition		Value
PEDAL SEN	Pedal position	Forward	0.5V
PEDAL SEN	Pedal position	Backward	4.5V

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".