DRIVER SIDE : Component Inspection

COMPONENT INSPECTION 

1. CHECK POWER WINDOW MOTOR
   1. Turn ignition switch OFF.
   2. Disconnect front power window motor (driver side) connector.
   3. Check motor operation by connecting the battery voltage directly to front power window motor (driver side) connector.
      TERMINALS AND POWER WINDOW MOTOR OPERATION POSITION
      
      

      Front power window motor (driver side) connector	Terminal		Motor operation
      	(+)	(-)
      D10	1	2	DOWN
      	2	1	UP

      Is the inspection result normal? 

      YES: Driver side power window motor is OK.

      NO: Replace driver side power window motor. Refer to REMOVAL AND INSTALLATION .