LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> Component Diagnosis >> DTC B2601: Shift Position >> Component Inspection

Component Inspection

  1. CHECK A/T DEVICE (DETENTION SWITCH)
  1. Turn ignition switch OFF.
  2. Disconnect A/T device (detention switch) connector.
  3. Check continuity between A/T device (detention switch) terminals as follows.
CONTINUITY CHART

A/T device (detention switch) Condition Continuity
Connector Terminal
M137 10 11 A/T selector lever P position Not existed
Other than above Existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace A/T device. Refer to 2WD : INSPECTION AND ADJUSTMENT (2WD models) or AWD : REMOVAL AND INSTALLATION (AWD models).

scientia non olet · About LEMON Manuals