How to Display SRT Status
WITH CONSULT-III
Selecting "SRT STATUS" in "DTC CONFIRMATION" mode with CONSULT-III.
For items whose SRT codes are set, a "CMPLT" is displayed on the CONSULT-III screen; for items whose SRT codes are not set, "INCMP" is displayed.
A sample of CONSULT-III display for SRT code is shown in the figure.
"INCMP" means the self-diagnosis is incomplete and SRT is not set.
"CMPLT" means the self-diagnosis is complete and SRT is set.
NOTE:
Though displayed on the CONSULT-III screen, "HO2S HTR" is not SRT item.
WITH GST
Selecting Service $01 with GST (Generic Scan Tool)
NO TOOLS
A SRT code itself can not be displayed while only SRT status can be.
- Turn ignition switch ON and wait 20 seconds.
- SRT status is indicated as shown below.
- When all SRT codes are set, MIL lights up continuously.
- When any SRT codes are not set, MIL will flash periodically for 10 seconds.