Terminals and Reference Value for Combination Meter

TERMINALS AND REFERENCE VALUE FOR COMBINATION METER

Terminal No.	Wire color	Item	Condition		Reference value
			Ignition switch	Operation or condition
1	G	Vehicle speed signal (8-pulse)	ON	Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]	NOTE: Maximum voltage may be 5 V due to specifications (connected units). Courtesy of NISSAN MOTOR CO., U.S.A.
4	LG	ACC power supply	ACC	-	Battery voltage
5	B	Ground	ON	-	Approx. 0 V
6
7	G/Y	Ignition power supply	ON	-	Battery voltage
8	R/W	Battery power supply	OFF	-	Battery voltage
13	L/B	TX communication line (To unified meter and A/C amp.)	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
14	PU	RX communication line (From unified meter and A/C amp.)	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
15	B	Ground	ON	-	Approx. 0 V
25	-	Illumination control switch (-)	OFF	Illumination control switch (-) is pressed.	Approx. 0 V
				Illumination control switch (-) is released.	Approx. 5 V
26	-	Illumination control switch (+)	OFF	Illumination control switch (+) is pressed.	Approx. 0 V
				Illumination control switch (+) is released.	Approx. 5 V
27	-	Odo/trip meter and illumination control switch ground	OFF	-	Approx. 0 V
35	-	Trip reset switch	OFF	Trip reset switch is pressed	Approx. 0 V
				Trip reset switch is released	Approx. 5 V
36	-	Trip transfer switch	OFF	Trip transfer switch is pressed	Approx. 0 V
				Trip transfer switch is released	Approx. 5 V