Check ACC Switch

1. CHECK ACC SWITCH 

   With CONSULT-III 

   Check ACC switch ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-III.

   CONSULT-III DATA MONITOR
   
   

   Monitor item	Condition
   ACC SW	Ignition switch position is ACC or ON	: ON
   	Ignition switch position is OFF	: OFF

Without CONSULT-III 

Check voltage between BCM connector and ground.

Fig 1: Identifying Voltage Between BCM Connector And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: ACC switch is OK.

NG: Check the following.

• 10A fuse [No. 6, located in fuse block (J/B)]
• Harness for open or short between BCM and fuse.