Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

• Surely clamp fuel hoses and insert hose to the length below.

Fuel filler hose: 35 mm (1.38 in) 

The other hoses: 25 mm (0.98 in) 

• Be sure hose clamp is not placed on swelled area of fuel tube.
• Tighten the clamp hand with the top mark (A) until the mark is on the bolt head flange.

Fig 1: Tightening Clamp Hand With Top Mark

Courtesy of NISSAN MOTOR CO., U.S.A.

• To connect quick connector, refer to REMOVAL AND INSTALLATION  .