Component Inspection

CHECK SLIDING SWITCH

Turn ignition switch OFF.
Disconnect power seat switch connector.

Check continuity between power seat switch terminals.

CONTINUITY CHART

Power seat switch		Condition		Continuity
Terminal		Condition		Continuity
32	11	Sliding switch (backward)	Operate	Existed
	11	Sliding switch (backward)	Release	Not existed
	26	Sliding switch (forward)	Operate	Existed
	26	Sliding switch (forward)	Release	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace power seat switch. Refer to "REMOVAL AND INSTALLATION ".