LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case (ETX13B) >> Disassembly And Assembly >> MAINSHAFT >> Disassembly

Disassembly And Assembly: MAINSHAFT: Disassembly

  1. Separate front case and rear case, then remove mainshaft assembly. Refer to DISASSEMBLY  .
  2. Remove snap ring (1) from mainshaft.
    Fig 1: Identifying Snap Ring
    G05727221Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove spacer from mainshaft.
  4. Remove electric controlled coupling and sprocket from mainshaft.
  5. Remove needle bearing from mainshaft.
scientia non olet · About LEMON Manuals