LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case (ETX13B) >> Disassembly And Assembly >> MAINSHAFT >> Assembly

Disassembly And Assembly: MAINSHAFT: Assembly

  1. Install needle bearing to mainshaft.
    CAUTION: Apply transfer fluid to periphery of needle bearing.
    Fig 1: Identifying Needle Bearing
    G05727222Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install sprocket and electric controlled coupling to mainshaft.
  3. Install spacer to main shaft.
  4. Install snap ring (1) to mainshaft.
    CAUTION: Never reuse snap ring.
    Fig 2: Identifying Snap Ring
    G05727221Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Install mainshaft assembly to rear case, then install front case and rear case. Refer to ASSEMBLY  .
scientia non olet · About LEMON Manuals