LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Component Diagnosis >> Selector Lever Position Indicator >> Component Inspection

Component Inspection

  1. CHECK SELECTOR LEVER POSITION INDICATOR

    Check that selector lever position indicator lamps turn on.

    CAUTION: Connect the fuse between the terminals when applying the voltage.
    FUSE STATUS CHART

    (+) (fuse) (-) Condition Status
    Selector lever position indicator connector
    Connector Terminal Connector Terminal
    M221 2 M221 7 Apply 12 V direct current between terminals 2 and 7. "N" position indicator lamp turns on.
    3 Apply 12 V direct current between terminals 3 and 7. "D" position indicator lamp turns on.
    4 Apply 12 V direct current between terminals 4 and 7. "R" position indicator lamp turns on.
    5 Apply 12 V direct current between terminals 5 and 7. "P" position indicator lamp turns on.
    6 9 Apply 12 V direct current between terminals 6 and 9. "M" mode indicator lamp turns on.
    10 11 Apply 12 V direct current between terminals 10 and 11. Illumination lamp turns on.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace the selector lever position indicator. Refer to "2WD : EXPLODED VIEW " (2WD), "AWD : EXPLODED VIEW " (AWD).

scientia non olet · About LEMON Manuals