Diagnostic Procedure
- CHECK HARNESS CONNECTOR
Check the connection of harness connector.
Is the inspection result normal?
YES: GO TO 2.
NO: Replace harness connector.
- CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES: GO TO 3.
NO: Replace wiring harness.
- CHECK FRONT SIDE AIRBAG MODULE
- Replace front LH side airbag module. Refer to EXPLODED VIEW .
- Check "Self diagnosis result" with CONSULT-III.
- Perform DTC confirmation procedure. Refer to DTC LOGIC
.
Is DTC detected?
YES: GO TO 4.
NO: INSPECTION END
- CHECK AIRBAG DIAGNOSIS SENSOR UNIT
- Replace airbag diagnosis sensor unit. Refer to EXPLODED VIEW .
- Check "Self diagnosis result" with CONSULT-III.
- Perform DTC confirmation procedure. Refer to DTC LOGIC
.
Is DTC detected?
YES: GO TO 1.
NO: INSPECTION END