LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> QX56 RWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> DTC P0615 Start Signal Circuit >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine.
  4. Drive vehicle for at least 2 consecutive seconds.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: CONSULT-II Function Screen Display - SELECT DIAG MODE
    G04899604
scientia non olet · About LEMON Manuals