LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> QX56 RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Control Unit >> Initialization Procedure

Initialization Procedure

  1. If control unit has been replaced, proceed to step 2. If control unit has not been replaced, use CONSULT-II "CLEAR HEIGHT INI" work support function to clear initialization flag and value. The CK SUSP warning lamp should illuminate. Using CONSULT-II "EXHAUST SOLENOID" active test, release the air pressure from the rear load leveling air suspension system.
  2. Roll vehicle forward and backward.
  3. Use CONSULT-II "ADJUST HEIGHT INI" work support function to set initialization condition.
  4. Confirm that CK SUSP warning lamp is OFF.
scientia non olet · About LEMON Manuals