Terminals and Reference Values for Combination Meter
COMBINATION METER TERMINALS AND REFERENCE VALUES
| Terminal No. | Wire color | Item | Condition | Reference value (V) (Approx.) | |
|---|---|---|---|---|---|
| Ignition switch | Operation or condition | ||||
| 1 | O | Ignition switch ACC or ON | ON | - | Battery voltage |
| 8 | Y/R | Battery power supply | OFF | - | Battery voltage |
| 9 | R/G | Stop lamp switch | ON | Brake pedal depressed | Battery voltage |
| Brake pedal released | 0 | ||||
| 10 | P/B | Brake fluid level switch | ON | Brake fluid level low | 0 |
| Brake fluid level normal | Battery voltage | ||||
| 11 | L | CAN-H | - | - | - |
| 12 | P | CAN-L | - | - | - |
| 14 | P/L | Seat belt buckle switch RH | ON | Unfastened (ON) | 0 |
| Fastened (OFF) | Battery voltage | ||||
| 15 | Y/L | Fuel level sensor signal | - | - | Refer to "FUEL LEVEL SENSOR UNIT INSPECTION ". |
| 16 | B/P | Fuel level sensor and oil pressure sensor ground | ON | - | 0V |
| 17 | B | Ground | - | - | 0V |
| 18 | BR | Illumination control switch | - | Lighting switch ON | Refer to "ILLUMINATION OPERATION BY LIGHTING SWITCH ". |
| 23 | G | Parking Brake switch | ON | Parking brake applied | 0 |
| Parking brake released | Battery voltage | ||||
| 24 | O/L | Ignition switch ON or START | ON | - | Battery voltage |
| 27 | O/B | Seat belt buckle pre-tensioner assembly LH (seat belt buckle switch) | ON | Unfastened (ON) | 0 |
| Fastened (OFF) | Battery voltage | ||||
| 28 | G/O | Security indicator input | OFF | Security indicator ON | 0 |
| Security indicator OFF | Battery voltage | ||||
| 29 | W/R | Vehicle speed signal (8-pulse) | ON | Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)] | |
| 37 | W/L | Washer fluid level switch | ON | Washer fluid level low | 0 |
| Washer fluid level normal | Battery voltage | ||||