LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> QX56 AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Trouble Diagnosis For System >> Line Pressure Switch >> Component Inspection

Component Inspection

  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Remove line pressure switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
  3. Push and release line pressure switch and check continuity between transfer terminal cord assembly terminal 1 and ground.
    TERMINALS CONTINUITY CHART

    Terminal Condition Continuity
    1 - Ground Push line pressure switch Yes
    Release line pressure switch No
  4. If NG, replace the line pressure switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
    Fig 1: Checking Continuity Between Terminal 1 And Ground
    G04901557
scientia non olet · About LEMON Manuals