Removal and Installation: Installation
WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Tighten the bolts to specification.
Bolt length : 45 mm (1.77 in)
Transfer bolt torque : 36 N.m (3.7 kg-m, 27 ft-lb)
- After installation check the transfer fluid level and for fluid leakage. Refer to "TRANSFER FLUID ".
- After filling, start the engine and let it run for one minute. Then stop the engine and recheck the transfer fluid.